Get the Fiberbuilt Performance Turf Tee Box 4×4.
| Fiberbuilt Player Preferred Studio 8×4 | Fiberbuilt Performance Turf Tee Box 4×4 | |
|---|---|---|
| Price (MSRP) | $1,499 | $499Lower price |
| Type | Hitting Mat | Hitting Mat |
| Size | 97 in × 49 in | 49 in × 49 in |
| Thickness | 1.75 in | 2 in |
| Hitting area | Hitting panel to one side | Anywhere on the surface |
| Replaceable hitting strip | Not published | No |
| Tees | A Friction-Fit Tee Holder fits in the hitting panel holes to allow you to use real tees for any type of tee shot | you can tee it up from anywhere on the mat using a standard tee right in the turf |
| Durability guarantee | Not published | Not published |
| Weight | 133 lbs | 72 lbsLighter |
| Material | Pure Impact Turf hitting panel; rubber-backed stance and spacer mats; shock-absorbing rubber foundation | Performance Turf (all-nylon, UV-resistant fibers) on modular shock-absorbing rubber foundation |
| In the box | Pure Impact Turf hitting panel (2'x4'), Rubber-backed stance mat (4'x4'), Rubber-backed spacer mat (2'x4'), Shock-absorbing rubber foundation, Friction-Fit Tee Holder | Not published |
| Warranty | Stance and turf mats: limited 1-year warranty against manufacturers defects; rubber bases: 5 year limited warranty against defects | Stance and turf mats: limited 1-year warranty against manufacturers defects; rubber bases: 5 year limited warranty against defects |
Get the Fiberbuilt Performance Turf Tee Box 4×4.
Get the Fiberbuilt Performance Turf Tee Box 4×4. It lists $1,000 under the Studio 8×4, it's 72 lbs, a real tee goes anywhere on it, and the rubber base carries the same 5-year warranty as its bigger sibling. The Fiberbuilt Player Preferred Studio 8×4 earns its $1,499 list price when you need the full 97-inch runway — specifically the dedicated spacer section for a face-on launch monitor — and don't mind moving 133 lbs to get there.
Both are Fiberbuilt mats built on a modular shock-absorbing rubber foundation, both warranty that base for five years, and both limit the surface turf itself to one year. Real tees work on each of them. Neither one publishes a shot guarantee on the turf. Fiberbuilt does say the Studio 8×4 needs a firm, level surface and must not go on bare ground or grass; the Tee Box is listed for indoor or outdoor use.
The Studio 8×4 measures 97 in × 49 in. The Tee Box 4×4 is 49 in × 49 in. That extra 48 inches of length in the Studio isn't just stance room — the system breaks into distinct zones: a 2′×4′ Pure Impact Turf hitting panel, a 4′×4′ rubber-backed stance mat, and a 2′×4′ spacer mat. That spacer is specifically called out as being sized for a face-on launch monitor. If your launch monitor sits beside the hitting panel rather than behind you, that built-in section is what it's for. The Tee Box 4×4 is one uniform surface: no zones, no spacer, no designated hitting strip.
The Studio's hitting panel is offset — you hit from one defined section of the mat. The Tee Box is full-surface, meaning you can set up and tee it up from anywhere on the 49-inch square. That sounds like a minor point until you're sharing a mat with a left-hander or just want to shift your feet. The Studio handles right- or left-handed setups too, but the hitting position is still fixed to that 2-foot panel. Both use real tees, though the mechanism differs: the Studio uses a Friction-Fit Tee Holder that sits in holes in the hitting panel; the Tee Box lets a standard tee go straight into the turf anywhere.
The Tee Box is 2 inches thick; the Studio is 1.75 inches thick. That quarter-inch gap is worth knowing if you're placing a floor-standing launch monitor on the mat, since the two surfaces sit it at slightly different heights. Check the figure against what your unit needs. The Studio weighs 133 lbs against 72 lbs for the Tee Box — a 61-lb difference that's real when you're reconfiguring the bay or moving it for storage.
The Studio's Pure Impact Turf panel is the part that takes your divots, and the system is assembled from discrete components — panel, stance mat, spacer mat, base. Fiberbuilt doesn't publish whether the hitting panel is sold separately for replacement. The Tee Box has no hitting strip to replace at all — Fiberbuilt's own note is that when the turf wears, you're dealing with the whole mat.
Get the Fiberbuilt Player Preferred Studio 8×4 if:
Get the Fiberbuilt Performance Turf Tee Box 4×4 if:
These two mats share a brand and a base warranty, but they're aimed at pretty different setups. The Tee Box 4×4 is the right call for most home bays: it's lighter, simpler, and lists for $1,000 less. The Studio 8×4 is purpose-built for a more configured simulator space, particularly if a face-on launch monitor is part of your setup and you want a mat that was designed with that in mind. Know your monitor, know your space, and the choice is pretty clear.
Get the Fiberbuilt Performance Turf Tee Box 4×4.