What They Have in Common
Both are offset-position mats that accept real tees, and both carve out space beside the hitting panel for a launch monitor. Neither maker publishes a swing guarantee. Both list above $1,000.
Where They Differ
Size and Weight
The SIGPRO Softy 4×10 is 120 in long; the Fiberbuilt Player Preferred Studio 8×4 is 97 in long. Width is almost identical — 48 in vs 49 in. The extra 23 inches on the SIGPRO is stance and monitor room — The Indoor Golf Shop describes the 4×10 as the 4×7's construction and strip with a longer stance and monitor area.
Weight is the starker gap. The Fiberbuilt comes in at 133 lbs. The SIGPRO is 31 lbs. That's a 102 lb difference — the kind of gap that determines whether one person can move this thing or whether you need help. If the mat is going somewhere permanent and never moving again, fine. If it's going in a space that does double duty, 31 lbs is a different conversation than 133.
Thickness and What That Means at the Floor
The Fiberbuilt is 1.75 in thick. The SIGPRO is 2.5 in thick. That's a 0.75 in difference, and it's the figure to check if a floor-standing launch monitor is going next to the mat rather than on it — the ball sits three-quarters of an inch higher on the SIGPRO. Both makers note monitor space beside the hitting surface; what the height difference means for your particular device is yours to check.
The Fiberbuilt does include a separate spacer mat explicitly described as being for a face-on launch monitor. That's in the box. The SIGPRO notes launch monitor space beside the strip but the resolution is yours to figure out.
The Hitting Strip
This is where the two mats diverge most. The SIGPRO Softy 4×10 has a replaceable hitting strip — 1-inch Teeline turf over a soft foam insert, with three compression slots, and when it wears you swap the strip, not the mat. The Fiberbuilt uses Pure Impact Turf, which is a specific proprietary surface, but Fiberbuilt publishes no information about replacing just the hitting panel. Once it's worn, you're looking at a different conversation.
The Fiberbuilt includes a Friction-Fit Tee Holder that drops into holes in the hitting panel. The SIGPRO's Teeline turf takes tees directly — no holder required, adjustable height. Both accept real tees; they just get there differently.
Warranty
The Fiberbuilt splits its coverage: one year on the turf and stance mats, five years on the rubber base. The SIGPRO Softy 4×10 — The Indoor Golf Shop publishes no warranty for it. That's a real gap. Worth noting before spending $1,199.99.
Also worth noting: the Softy 4×10's listing gives its strip height as 2⅜ in, while the 4×7's page gives 2½ in. Those two numbers haven't been reconciled.
Who Should Buy Which
Get the SIGPRO Softy 4×10 if:
- You want a replaceable hitting strip so you're not retiring the whole mat when it wears
- Moving the mat occasionally is a real-world need — 31 lbs vs 133 lbs is the whole argument
- The $299.01 list-price difference matters
- Ten feet of mat length fits your setup
Get the Fiberbuilt Player Preferred Studio 8×4 if:
- You're using a face-on launch monitor and want the spacer mat that comes in the box specifically for that configuration
- You want a published warranty that covers the surface (one year) and the base (five years)
- The mat will never move and weight is irrelevant
- 97 in of length fits your bay better than 120 in
The Bottom Line
The SIGPRO Softy 4×10 costs less at list, weighs a fraction of what the Fiberbuilt does, and has the one feature that makes a mat a long-term purchase rather than a one-time expense: a strip you can replace when it wears. The Fiberbuilt's face-on launch monitor spacer is a specific, useful thing — but it's not enough to close a $299 gap and a 102 lb weight difference for most people. The missing warranty on the SIGPRO is a real caveat, and worth asking about before you buy. But on balance the case is clear.
Get the SIGPRO Softy 4×10.